How to set the Measure Mode [GNSS]

Description

Settings for Measure Mode can be found in the Status bar accessible from any application, except Draw/Sketching.

Status 1:

Set Measure Mode Step-by-Step

1. From within the current application, tap in the Status bar and select Measure Mode .
   
   
   A subscreen opens automatically, with the currently active measurement mode highlighted.
2. 
   
   1. Select Instant to have the current position measured and recorded immediately after pressing Measure, when back in the application. Instant is the default setting.
   2. Define a time period according to your needs at Averaging Time (sec):. Now select Average (time) as measurement mode. When you press Average back in the application, the instrument measures for the time period defined and record the calculated average data.
   3. Select Average (manual) as measurement mode. Back in the application press Start to start measuring. Press Stop to stop the measuring manually. A screen pops up showing the relevant information. You can store the calculated average data or refuse them.
   4. Define the number according to your needs at Averaging Measurements:. Now select  Average (# of meas.) as measurement mode. When you press Average back in the application, the instrument performs the number of measurements defined and records the calculated average data.
3. The software proceeds with the current application and the newly set measurement mode active.
   
   These Measure Mode settings are relevant for the instrument used as rover.