Default Map View

Jump To

Applications Key

Admin Panel Key

Status 1

Status 2

Information Bar

Warning Bar

North Indicator and Scale Bar

Indicator for Limit Box

Indicator for Clipping Filter

Offset IndicatorDefault

Main Map Area

Measure Bar

Mini Map Button

Home Key

Toolbox

Favourites

Setup/Coordinate System

Map Handler

Default Map View

Classic Home Screen Enabled

On how to change default settings from using the 'Classic Home
screen' to using the 'Admin Panel' and vice versa, refer to: Display

a Application key
b Status 1
c Status 2
d Information bar
e Warning bar (only displayed if
there is an issue)
f Scale bar
g North indicator
h Button for panning mode
i Button for rotation mode (3D)
j Button for auto-centring the
map view
k Limit Box indicator
l Clipping Filter indicator
m Offset indicator
n Isolation mode indicator
o Main map area
p Measure bar
q Mini Map button
r Home key
s Toolbox
t Favourites
u Map handler

Classic Home Screen Disabled

a Admin Panel key
b Status 1
c Status 2
d Information bar
e Warning bar (only displayed if
there is an issue)
f Scale bar
g North indicator
h Button for panning mode
i Button for rotation mode (3D)
j Button for auto-centring the
map view
k Limit Box indicator
l Clipping Filter indicator
m Offset indicator
n Isolation mode indicator
o Main map area
p Measure bar
q Mini Map button
r Applications key
s Toolbox
t Setup (TPS)/Coordinate System (GNSS)
u Map handler

Element/Description

A.1) Application Key (iCON Site/iCON Site Plus)

• Displays name of current active project, active job and active coordinate
system.
• Allows for quick access to licenced applications. 

A.2) Admin Panel key (iCON Build/iCON Build Plus)

• Opens the Admin Panel as a fly-out in the foreground of the Map View.
• The Admin Panel offers similar functionality as the classic Home screen. See also: Overview on Home screen/Admin Panel

• Access to applications is available via the Applications
  key (see further below).
• Access to Devices and Clouds is available via the Status
  Bars (see below). 
  
  

B) Status 1 

• Displays status of connected Total Station or GNSS instrument.
• Contains options to directly edit function/status of the connected instrument.
• Allows for viewing Total Station or GNSS Base Station information, depending on the connected instrument.

Additional function when using iCON build/iCON build Plus default
settings:

• The overall Devices Management can be accessed from here.
  See also:
  Status bar TPS
  Status bar GNSS
  
  

C) Status 2

• For TPS: displays status of target, for example pole and prism information, and controller.
• For GNSS: displays status of the communication devices (radio or modem). Contains options to edit relative settings.
• Displays Leica ConX status information, if Leica ConX license is activated.
• The overall Clouds Management can be accessed from here.
See also:
Status bar TPS
Status bar GNSS

D) Information Bar

Displays information about the current measurement, the selected
points, and all configured values. Tap and hold to configure.

E) Warning Bar

Displays any issues with the operation that may compromise usability. 

F/G) North Indicator and Scale Bar

• Indicates scale and orientation of display.
• Tap the North indicator to reset the map to 2D view.

K) Indicator for Limit Box

• Displayed if Limit Box mode is active.
• Allows quick access to the Limit Box function. 

L) Indicator for Clipping Filter

• Displayed if Clipping Filter mode is active.
• Allows quick access to the Clipping Filter function. 

M) Offset indicator

• Displayed if an offset is applied temporarily.
• Allows quick access to the Offset toolbar.

N) Indicator for Isolation mode

• Displayed if Isolation mode is active.
• Allows quick access to the Isolate function.

O) Main map area

Graphically displays pre-loaded data and measured data.

P) Measure bar

• Displays main command keys, for example Measure or Store.
• Tap and hold to configure the Measure bar.

Q) Mini Map button

• Allows the user to keep an overview on full data extents while
the Map view is zoomed in to a detail.
• Can be used to jump from the inspection of one detail to
another without the necessity to leave the current zoom level.
Refer to Using the Mini Map step-by-step for further information.

R.1) Home Key (iCON Site/iCON Site Plus)

Navigates Back to Home Screen

R.2) Applications Key (iCON Build/iCON Build Plus)

Displays the different applications available for use.
See also: General Information on Applications

S) Toolbox

Contains functions relevant to the active application

T.1) Favourites (iCON Site/iCON Site Plus)

• Contains Camera, Calculator and TPS setup, when connected to a TPS.
• You can add Measure Bar functions into the Favourites. Refer to Measure bar for information about configuring Favourites. 

T.2) Setup/Coordinate System (iCON Build/iCON Build Plus)

Navigates directly to Setup TPS/Coordinate System GNSS.

U) Map Handler

Change zoom level and view mode. Define data displayed in the
main map area. Access to point list.

Depending on application in use, different functionality becomes available.